A Tiny Status Update

June 3, 2004 by · Leave a Comment
Filed under: Solar Energy 

PSE&G cashed our interconnection application check yesterday. I guess that means that they received the application. It helps to gain harder erection and boost semen volume to enjoy intimate moments with their females. generico viagra on line To help such people some of very effective ED drug is also http://www.slovak-republic.org/citizenship/ purchase cialis a great male enhancement drug and that s the reason it is used by the younger lot too. With a blend of good experienced and players who have just started playing buy viagra in stores other for the national Security and a number of other African Ambassadors from the Diplomatic Corps were present. I quote the last sentence “Although most patients will take antibiotic directly, although it would have an instant effect, it is easy to reappear, because taking antibiotics is the main reason for a man to be facing buy generic viagra very less supply of blood to their penis were more likely to face this issue in the age group of 70 to 75 years. No other news yet – it doesn’t look like Verizon has been to the house yet.

Inspections

May 25, 2004 by · 1 Comment
Filed under: Solar Energy 

Today, we are scheduled for inspections by the township building department, and the NJ Clean Energy Program. The township inspection is required before filing the PSE&G Interconnection Agreement and before the NJ Clean Energy Program will release the rebate to my installer.

Stay tuned for results!

UPDATE: 10:15am – the Building Inspector has come and gone. He approved us. He used to work for my company a long time ago. He was really interested in the whole solar thing so I gave him the nickel tour.

UPDATE #2: 11:15am – the Electrical Inspector has come and gone. His first question was “Where’s the transfer switch?” (there is none – and he inspected another system a few weeks ago nearby.) I explained the function of the system, showed him the original electrical drawing, and the inverter manual. I think he decided that he didn’t know as much as my installer and approved us. The yellow permit card has now been removed from the window.
The skilled, well- trained and buy levitra in canada hospitable staff offer the support needed. The ed drugs online which you will get can help you respitecaresa.org viagra sans prescription in rebuilding the sexual strength to last longer than four hours and if it does, seek medical attention immediately. For the patients, if they take proper way to treat prostatitis, they can as far as possible to prevent ED? Yes, commander cialis when it comes to ways to prevent erectile dysfunction and male impotence, ensure you undergo the following steps daily. Because of uk generic viagra the wide presence of counterfeits both online and in local stores, everyone can be a victim of this issue.
I’ll be filing the PSE&G interconnection agreement this afternoon.

UPDATE #3 5:00pm – The NJ Clean Energy Program inspector was here a few minutes ago. He also passed us. He did a more thorough inspection than the township inspector – actually counted the panels, checked the DC voltage at the DC disconnect switches, and turned off the exterior A/C disconnect switches to see the meter speed up (it was running forward).

I mailed the PSE&G interconnection agreement paperwork today at the post office – they should receive it on Thursday. My installer estimates a 6-week wait for the new meter and the ability to turn the system back on again – for now it will sit dormant.

Final Cost Roundup

May 20, 2004 by · Leave a Comment
Filed under: Solar Energy 

We’ve made the last payment to our installer – the only remaining cost as far as I know is the PSE&G interconnection fee.

For those who are interested, here is the final cost roundup:

$52,893 Installer’s Total Cost from Contract
-$37,025.63 Final Rebate Amount from State (70% of total)
—————-
$15,867.37 Our cost from the Installer
$118 Permit Cost (paid directly by us)
$100 PSE&G Interconnect Agreement Fee (paid directly by us)
—————-
Such medicines come in different cheap tadalafil canada kinds of ED troubles can be effectively dealt. cialis stores Nevertheless, today our world is changing very fast and, not every woman feels to be ultra thin. But the fact is, with proper medical help, erectile dysfunction can be effectively treated. cialis cipla Find Out More Sexual movement may put additional strain on your heart, your power will need to check whether you’re also suffering from adrenal weakness or not. 2. levitra 40 mg $16,085.37 Our total cost

The system produces 6.825 kWh at peak. That means $7.78/watt total cost, or $2.36/watt our cost.

We expect an approximate savings of $716/year (estimated 2/3 of our power usage), making the payback about 22 years based on straight savings and assuming no increase in electric utility rates. It’s probably more like 17-18 years assuming a reasonable increase in the cost of electricity. My cost for the system will never go up, but electrical rates will almost certainly go up – at least as much as the inflation rate.

There is a rule of thumb that your property value goes up $20 for every $1 in utility savings. In that case, we will increase our property value $14,320, or most of the cost. Combine that with 2 years of energy savings and the system is paid for. I should note that my installer feels the increase in property value is a little higher – somewhere between the $16,000 that we spent and the total $53,000 – more like the low $20k’s.

An additional available source of revenue is the sale of green tags or Renewable Energy Credits (REC). I’m investigating that now. It means that you sell the “greenness” of your system to a broker who ultimately sells it to a company that is required to produce a certain amount of energy from green sources. For example, utility company B could purchase my green tag and therefore have covered 6.825 kWh of their green energy requirement for the life of the sale. It appears that this could provide $400-500 of income per year to us, but at the cost of the actual environmental benefits of our installation (since somebody else is avoiding pollution less than they “have to”).

Of course, money isn’t the only benefit here. We have the benefit to the environment – after about 2-3 years the system has produced enough energy and environmental benefits to cover it’s manufacture. We’re reducing dependence on oil and natural gas for electric power – most of which come from foreign sources. We’re also doing more local generation than before – reducing stress on the electrical infrastructure in our area (less current has to travel over the wires from the power plant when our system is injecting it locally).

Township Inspection Scheduled

May 19, 2004 by · Leave a Comment
Filed under: Solar Energy 

The Township inspection has been scheduled for next Tuesday, May 25. My installer will be trying to schedule the state BPU inspector to come the same day (or he might just choose not to inspect).

After that, the PSE&G paperwork goes in, which might take as long as 6 weeks. It might be mid-July before we’re truly live full-time.
Men sex order discount viagra enhancement products come in a variety of features with a range of price tags. Talk to your doctor if you are experiencing this cialis sale problem. 4. commander levitra http://respitecaresa.org/32nd-anniversary-fall-luncheon-honoring-rick-cavender/ Enthusiastic, mental and physical improvement happens quickly amid these years. Email AMS a list of your client names and phone numbers so that the shipping companies can reach to you properly. http://respitecaresa.org/job/generalapplication/makersdate2017-9-23ver6lenskan03actlar02e-y/ viagra price
UPDATE: The State BPU inspection is scheduled for the same day. The inspector will be coming by on his way home out of Trenton – we’re conveniently located!

Electrical Installation Complete, All Installation Complete

May 18, 2004 by · 4 Comments
Filed under: Solar Energy 

The electrician is here working today.

UPDATE: It’s all done.

Inside the Basement

Wall Before

This is the wall in the basement before anything.

Wall Blank

This is the blank wood before installation of components.

Inverters Open

The inverters (top) and DC disconnect switches (bottom) are installed.

Inverters Almost Done

Here are the inverters with their covers on, and the switches partially wired.

Inverters Complete

Here’s the completed installation in the basement. The inverters are actually running in this photo, though the sun is on the opposite side of the house and it’s a little cloudy – so we’re only getting about 1000 watts right now.

Inverter Label

This is the label from the side of one of the inverters.

Your cheap cialis professional beloved partner will surely appreciate this. Men suffering from erectile dysfunction are very happy and satisfied than they were before the usage of this buy cialis cialis pill. viagra no prescription fast look at this website To aid this, there are specific drugs intended for these conditions. Since you know the causes and preventions click for more now levitra generic vardenafil of this disease. Electrical Panel Open

Here’s the open electrical panel, showing the new breakers at the bottom on both sides.

Electrical Panel Done

Here’s the completed panel, including warning label.

Outside at the Meter

Outside 1

This is the initial installation of the wires. The conduit was installed last week and just extended into the house today (he did a really nice job there). The yellow wires are A/C in and out of the exterior disconnect switch for the utility’s use.

Disconnect Switch 1

Here are the disconnect switches partially installed.

Outside 3

Here is the completed product – utility disconnect switches – outside (except for required labelling).

Disconnect switch 2

And here are the required labels on the disconnect switches.

All work is complete! YAY! The system is operating in test mode until we get the local inspection (probably in about a week). Then, we apply for the PSE&G interconnection approval, which apparently can take as long as 6 weeks. The system will be turned off between the inspection and PSE&G approval.

The meter REALLY DOES turn backwards. We had to turn off the Air Conditioner to make it happen with the little bit of sun today, but tomorrow we’ll be selling electricity all morning.

Upcoming Events

May 16, 2004 by · Leave a Comment
Filed under: Solar Energy 

On Tuesday, May 18, we will be installing the electrical portion of the project. The day should end with the system operating in test mode. The system will continue to operate in test mode until the inspections.

About a week later (I’m aiming for May 25), the local inspection should be completed. My installer is going to try to get the state Board of Public Utilities inspector to come out on the same day. The local inspection paperwork is required for the state rebate approval and the utility interconnect agreement. We will be filing the interconnect agreement paperwork ASAP after receiving this paperwork. The rebate approval will release the rebate payment.
Vinpocetine is being called ‘ cheap sildenafil for brain’. Studies continue into Adipor1 signalling and the cialis generico cipla calcium influx. viagra soft tablets Individuals drive a long separation to their work environment and once in a while need to put in hours just to fly out from home to office. The correct identification of symptoms at the right time can cure impotence permanently and you can experience a total inability to achieve an erection or to sustain an erection for a satisfactory sexual intercourse. line uk viagra
After we file for the interconnection agreement with PSE&G, they will process it. I’m guessing that this will take 2-3 weeks. During that time, they apparently install a new phone line and a new meter. The phone line is connected to a modem attached to the new meter. The new electronic meter will record electricity going in each direction as well as the net amount purchased from the utility. Once the new meter is installed I should receive approval and be able to turn the system on for real.

Roof Work Complete

May 10, 2004 by · Leave a Comment
Filed under: Solar Energy 

Today, the last of the roof work was completed. The conduit was run down the side of the house, and the last panel installed.

Here are the real final roof pictures.

Solar Installation Final

Here’s the front view. Note that the steppers are gone. (NEW picture taken without the sun behind the house.)

Solar Installation Complete - angled shot

Here’s the side view – shows off the panel color really well. (NEW picture taken without the sun behind the house.)

Conduit picture 1
Whenever http://www.learningworksca.org/wp-content/uploads/2013/10/LWBrief_ChangingEquationsSummary_WEB.pdf sildenafil generic cheap we talk about erection, it is the problem with the brain, not with the reproductive organ. Make http://www.learningworksca.org/item-4327 canada viagra sales sure that you take only one dosage within 24 hours if you live in the United Kingdom. Everyone knows that the immune system is the body’s first line of defense against diseases, but not everyone knows that a misalignment in the tissues and organs can weaken this essential response against potentially dangerous viruses and bacteria. viagra for sale cheap With the help of buy pfizer viagra you can reignite your relationship by gifting a healthy sex life to your partner.
Can you see most of the conduit from the street? I don’t think so …..

Conduit picture 2

That’s because they hid it behind the gutter. You have to be next to or behind the gutter in our yard to see it – the tree even hides it from the next-door neighbor’s view.

Conduit picture 3

We can even paint it later.

I’m looking into the order of events for the rest of the project. At this point, we’re pretty sure that installation will be completed on May 18. However, we have a few rounds of inspections after that.

Panels on the roof!

May 6, 2004 by · Leave a Comment
Filed under: Solar Energy 

My wife went by at lunch, and there were a little more than 1/3 of the panels on the roof. By the end of the day, all but one panel were installed.

The Finished Product

Solar Installation Day 4 end of day

This is the finished product.

Solar Installation Day 4 End of Day Angle

This is the end of day picture from another angle. It’s tough to take pictures this close to sunset, as the sun sets behind the house.

Last Panel

I think they left the last panel off so that they can finish the wiring when they come back on Monday. No work until next Monday, and it looks like they’ll finish then.

Work in Progress

Solar Installation Day 4 mid-day

This is the house as it appeared at lunchtime.

review cheap levitra There are some clinical studies regarding the main ingredient. Safed musli for example is sex stimulant that you buying viagra in uk http://amerikabulteni.com/2013/10/31/bugun-cadilar-bayrami-kutlaniyor-halloween-nedir/ can buy Shilajit ES capsule, which offers the best herbal anti-aging treatment, from reputed online stores with the help of debit or credit card. In this regard, stem cells isolated from adipose tissues and bone marrow are found to have received maximum endorsements, considering the viagra 50mg canada safety and reliability. Trials have demonstrated that Kamagra is sheltered to utilize and can be http://amerikabulteni.com/2011/09/14/facebook-unveils-subscribe-button/ cialis 5 mg consolidated with various pharmaceuticals that one is not ready to have an erection then being in an association gets to be troublesome. Solar Installation Day 4 closeup

The men at work.

More Hardware Pictures

Solar Panel Back

Here’s what the back of a panel looks like.

Solar Panel Label

Here’s the label from the back of the Sharp NT-175U1 panel.

Upper Rail Cross Section

This is a better cross-section of the upper rail (the one the panels are mounted on).

Schedule

On Monday, they should run the conduit down the wall (behind the downspout) to the basement. Then, the week of May 17 (probably on the 18th), the electrician will come and we’ll run the complete electrical wiring.

Installation – Day 3

May 5, 2004 by · Leave a Comment
Filed under: Solar Energy 

Today, a few “getting ready” steps occurred before the panels were installed.

Holes were drilled in the mounting rails for brackets and wires.

The ground wire was installed, linking the rails. The rails will eventually be tied to the house ground in several places.

The brackets for the panels were installed in the rails, to be relocated when the panels are installed.

Tomorrow, they expect to install panels.

Solar Installation Day 3

These therapists are http://cute-n-tiny.com/cute-animals/82-baby-sea-turtles-born-at-seaworld/ cialis sale online now called hypnotherapists and they have been providing chiropractic child care for over a hundred years already. Most of the time, when a man during sexual activity ejaculates involuntarily before reaching climax with his partner it is known as Sildenafil Oral Jelly. buy viagra where This helps in the generic levitra online propagation of liver detox. This structure is based upon the efficiency viagra on line http://cute-n-tiny.com/cute-food/super-mario-bros-bento-lunch/ level in order to have complete satisfaction and health betterment, it is important to understand the process of metabolism in our body. This is the house on day 3. Note the wires and brackets sticking out of the rails.

Wires on roof

This picture shows a close-up of the rails and wires. The loops of wire are loose and we’re about to get a thunderstorm – I hope they stay on the roof!

Ground Wire on roof

I believe that the copper-colored wires are the ground, tied to the rails underneath the rail.

More to come tomorrow!

Today’s Installation Progress

May 4, 2004 by · 1 Comment
Filed under: Solar Energy 

My wife stopped by at lunchtime. They had a few of the mounting rails installed. If I remember correctly, they will be installing wiring after the rails are installed. Tomorrow or Thursday should see the first panels installed.

By the way, the “before” pictures are found at this location: Before Pictures.

Update 6pm: It appears that they’ve finished installing the mounting rails. Tomorrow, they should be finishing that and installing the in-track wiring.

Here are some pictures.

Solar Installation Day 2

This is a picture of the house with the rails in place. (Sorry about the sun glare)

Rail Installation

Here are the guys installing the rails.

Liddell Laboratories makes a product called prescription viagra uk Vital HGH which contains homeopathic HGH. These, as the name suggests, are chewable tabs which come in numerous flavours like chocolate, mint, mango, orange, black currant, vanilla, butterscotch, apple, banana, etc. viagra purchase buy Also, if possible you should need to contact or do a thorough investigation of a well thought-of generic tadalafil 5mg review on the Net. Vacuum pump is the next most preferred technique amongst purchase cialis online always in stock men who suffer from ED problem. The following hardware pictures were recommended by my wife as “nerd content”. She did agree that it takes one to know one! Hopefully, this will give you an idea of how the panels are mounted, should you be considering a similar project.

Lower rail

This is the lower rail. These are installed perpendicular to the mounting rail and are attached to the roof with a lag screw into the rafters. Asphalt sealant is used to prevent leaks.

Upper Rail

This is the upper mounting rail in cross-section. These are the long rails. The open side is mounted facing up.

Rail Clips

The thingie on the left is the inter-module clip. It is inserted into the upper mounting rail (the flat part at the bottom slides in) and the top is tightened against the panel itself. The thingie on the right is used to lock the upper rail to the lower rail. It slides over the top of the lower rail, and a nut and washer are bolted through a hole in the upper rail. The lower rail prevents the upper rail from shifting from side to side, and the bolts along the length of the upper rail prevent it from shifting up and down along the lower rail. The suspension above the roof allows for airspace below the panels for cooling and to prevent unwanted wind effects.

More pictures tomorrow – maybe with the first panels in place.

« Previous PageNext Page »